Demister Pad with or without Grids and Holders

• Demister pad, diameter 1200 mm, thickness 150 mm, liquid drop removal efficiency 99%, particle size at demister outlet is 6 micron.
• SS 304 demister pad with support grids for sulfur condenser, size: ID 2500 × LG 6100.
• Stainless steel demister pad, high 4", pad diameter 12", wire diameter 0.011", density 8.6 lb/linear ft.

Round PP demister pad with grid.

Round stainless steel demister pad with grid.

• Demister pad.
  • Material: SUS 304.
  • Demister pad with grid size: OD 3042 mm × thickness 250 mm.
  • Top and bottom grid size: 3 mm thickness × 25 mm width × 6 mm diameter.
  • Density: 80 kg/m³.
• Demister pad.
  • Wire diameter: 32 SWG.
  • Size: 12 inch width ×120 inch length × 4 inch thick.
  • Material: glass fiber.
  • Density: 15.75 LBS/CFT.
  • Contact surface: 400 m²/m³.
  • Free space: 98.5%.
• Demisters pads.
  • Thickness: 305 mm.
  • Mesh material: monel 400.
  • Holder material: ASTM SB164.
  • Wire diameter: 0.011".
  • Density: 9 lb/ft³.
  • Fraction void: 98.2%.
  • Surface area: 86 ft2/ft.
• Demisters pads.
  • Diameter: 863.6 mm.
  • Thickness: 152 mm.
  • Mesh material: monel 400.
  • Holder material: ASTM SB164.
  • Wire diameter: 0.011".
  • Density: 9 lb/ft³.
  • Fraction void: 98.2%.
• Demister pad.
  • Pad diameter: 1400 mm.
  • Pad thickness: 152 mm.
  • Total thickness: 203 mm with grids and holder.
  • Density of mesh: 7.8 lbs/ft³.
  • Constructive material: AISI 304L.
  • Manhole size: 24".
• Demister pad.
  • Dimension (mm): 850 × 673.
  • Pad thickness: 152 mm.
  • Total thickness: 203 mm with grids and holder.
  • Density of mesh: 7.8 lbs/ft³.
  • Constructive material: AISI 304L.
  • Manhole size: 24".
• Demister pad.
  • Pad diameter: 800 mm.
  • Pad thickness: 152 mm thick.
  • Density of mesh: 10.8 lbs/ft³.
  • Constructive material: AISI 304L.
  • Manhole size: 24".
• Demister pad
  • OD: 3886 mm.
  • Thick: 200 mm.
  • Plate thickness: 3 mm.
  • Pressure: 1.76 kg/cm².
  • Temperature: 150 deg c.
• Mesh demister pad
  • Material: 316 SS.
  • Width: 7 3/4".
  • Length: 72 3/8".
  • Thickness: 4".
• Mesh pad demister with upper and bottom grids.
  • Material: whole SS 304
  • Shape: rectangular.
  • Whole demister size: 2413 mm × 1371.6 mm × 150 mm.
  • Section size: W 402 × L 685.8 × T 150 mm.
  • Section number: 12.
• Stainless steel 304 demister pad.
  • Size: 10 × 2 feet.
  • Thickness: 6".
  • Wire diameter: 33 SWG.
  • Open area: 98%.
  • Bulk density: 144 kg/cu.m. (9 lbs/cu.ft.).
• SS 304 mesh pads.
  • Wire diameter: 1.5 × 0.15 mm.
  • Pad thickness: 6".
  • OD. diameter: 34-1/4".
  • Description: polypropylene crinkled wire mats.
  • Mandatory requirements: on installation thickness of 2 layer will be compressed to 160 mm.
• SS 304 demister pad.
  • Demister pad thickness: 200 mm.
  • Plate thickness: 3 mm.
  • Density: 190 kg/m³.
  • Pressure: 1.76 kg/cm².
  • Temperature: 50 DEG.C.
• SS 304 demister pad with grids.
  • Mattress diameter: 1500 mm.
  • Sectional: 375 mm.
  • Width: 150 mm.
  • Mattress thickness: 3 mm.
  • Mattress density: 144 kg/cm³.
  • Flat bar size: 25 mm × 3 mm.
  • Round bar size: 6.35 mm.
  • Number of sections: 4.
• Demister pad.
  • Material: stainless steel 304.
  • Wire diameter: 33 SWG.
  • Pad thickness: 6".
  • Pad size: 10' × 2'.
  • Open area: 98%.
  • Bulk density: 144 kg/cu.m(9 lbs/cu. ft).
• SS 340 demister pad.
  • Out side diameter: 1300 mm.
  • Sectional : 325 mm.
  • Width: 150 mm.
  • Thick: 3 mm.
  • Density: 144 kg/cm².
  • Operating work press: 74.3 kg/cm².
  • Operating work temperature: 4.4 DEG.C.

Titanium demister pad with stainless steel grids.

Monel demister pad with grids.

Round PP demister pad with top grid.

Stainless steel wavelike demister pad with top grids.