Stainless Steel Mist Eliminator - Scrubber or Pipeline

• SS 316 mist eliminator with 1800 mm diameter.
• Stainless steel mist eliminators, diameter 300 mm, thickness 100 mm.
• 316 stainless steel mist eliminator, 4" wide for small pilot scale scrubbers.
• Wire mesh mist pad, material: 304 SS, size: 24" high × 24" wide × 12" thickness, surface area: 86 ft2/ft.
• Mist eliminator pads for oilfield use, material 304 SS, size: 23.5 OD × 6" × thick 8".
• Mist eliminator, with stainless steel frame and 18 layers of stainless steel mesh, size 48" × 48" × 4" thick.
• Stainless steel evaporator mist pad, size 15.5" × 13" × 4".
• Stainless steel mist eliminator 12" × 14" × 4" for equipment that can extract liquids from our pipeline natural gas.
• SS 316L mist eliminator with high pressure drop and size of 8" diameter and 1".
• Mist eliminator filters.
  • Material: SS 316.
  • Size: 23.5" × 23.5" × 3.75" deep.
  • Efficiency: 90% on 5 micron.
  • Application: filter air from waste water plant before it goes into carbon.
• Stainless steel mist eliminator with grids.
  • Wire diameter: 580 mm, thickness: 100 mm.
  • Wire diameter: 480 mm, thickness: 100 mm.
  • Wire diameter: 200 mm, thickness: 80 mm.
  • Application: for natural gas separators and glycol dehydration units.
• Stainless steel 316L demister mist eliminator.
  • Demister with frame, size: 890 mm × 470 mm.
  • Demister with frame, size: 1160 mm × 470 mm.
• Mist eliminator for extractor mist.
  • Mist eliminator size: 41 3/4" OD × 4" thick mesh.
  • Whole material: SS 316L.
  • Number of sections: 3.
• 316 stainless steel mist eliminator.
  • Width: 10 cm.
  • Length: 12 meters.
  • Aperture of loop: 7 mm.
  • Wire diameter: 0.3 mm.
• Mist eliminator.
  • Material: stainless steel AISI 304.
  • Diameter: 765 mm.
  • Removal efficiency: 99%.
  • Fluid: natural gas.
• Mist eliminator.
  • Material: stainless steel 304.
  • Diameter: 750 mm.
  • Thickness: 100 mm.
• Mist eliminator.
  • Mist material: stainless steel AISI 304.
  • Mist diameter: 1414 × 225 × 100 mm.
  • Wire thickness: 0.23 mm or 0.28 mm.
  • Wire surface area: 350 m²/m³.
  • Density: 192 kg/m³.
• Mist eliminator.
  • Wire thickness: 33 SWG.
  • Mist material: stainless steel 304.
  • Mist eliminator: 10 × 2'.
  • Bulk density: 144 kg/cu.m.
• Mist eliminators.
  • Material: stainless steel 304.
  • Diameter: 300 mm.
  • Thickness: 100 mm.
• Mist eliminator.
  • Material: stainless steel steel 304.
  • Diameter: 750 mm.
  • Thickness: 100 mm.
• Mist eliminators
  • Material: stainless steel 304.
  • Diameter: 300 mm.
  • Thickness: 100 mm.
• 316 SS mist eliminator.
  • Thickness: 6".
  • Diameter: 0.011".
  • Removal efficiency: 99.7% of 10 micron and greater.
  • Additional information: 12 lb per cubic feet mesh pad fit in to 20" outside diameter vessels.
• Knitted mesh type mist eliminator.
  • Thickness: 100 mm.
  • O.D diameter: 684 mm.
  • Material of construction: stainless steel 316.
  • Free C.S area: >95%.
  • Mesh surface area: >350 m²/m³.
  • Wire thickness: 0.23 mm - 0.28 mm.
• SS 304 mist eliminator.
  • DP. thickness: 200 mm.
  • OD: 3886 mm.
  • Sectional: 330 mm.
  • Width: 1295 mm.
  • Plate thickness: 3 mm.
  • Density: 190 kg/m³.
  • Pressure: 1.76 kg/cm².
  • Temperature: 150 deg. C.
• Mist eliminator.
  • Wire thickness: 0.23 mm and 0.28 mm.
  • Size: 1414 mm × 225 mm × 100 mm.
  • Mesh type: Koch 4120.
  • Material: AISI 304.
  • Density: 192 kg/m³.
  • Surface area: 377 m².
  • Voids: 97.6 %.
  • Wire surface area: 350 m²/m³.

Stainless steel mist eliminator top grid.

Round stainless steel mist eliminator.