Stainless Steel Mist Eliminator - Scrubber or Pipeline

  • SS 316 mist eliminator with 1800 mm diameter.
  • Stainless steel mist eliminators, diameter 300 mm, thickness 100 mm.
  • 316 stainless steel mist eliminator, 4" wide for small pilot scale scrubbers.
  • Wire mesh mist pad, material: 304 SS, size: 24" high × 24" wide × 12" thickness, surface area: 86 ft2/ft.
  • Mist eliminator pads for oilfield use, material 304 SS, size: 23.5 OD × 6" × thick 8".
  • Mist eliminator, with stainless steel frame and 18 layers of stainless steel mesh, size 48" × 48" × 4" thick.
  • Stainless steel evaporator mist pad, size 15.5" × 13" × 4".
  • Stainless steel mist eliminator 12" × 14" × 4" for equipment that can extract liquids from our pipeline natural gas.
  • SS 316L mist eliminator with high pressure drop and size of 8" diameter and 1".
  • Mist eliminator filters.
    • Material: SS 316.
    • Size: 23.5" × 23.5" × 3.75" deep.
    • Efficiency: 90% on 5 micron.
    • Application: filter air from waste water plant before it goes into carbon.
  • Stainless steel mist eliminator with grids.
    • Wire diameter: 580 mm, thickness: 100 mm.
    • Wire diameter: 480 mm, thickness: 100 mm.
    • Wire diameter: 200 mm, thickness: 80 mm.
    • Application: for natural gas separators and glycol dehydration units.
  • Stainless steel 316L demister mist eliminator.
    • Demister with frame, size: 890 mm × 470 mm.
    • Demister with frame, size: 1160 mm × 470 mm.
  • Mist eliminator for extractor mist.
    • Mist eliminator size: 41 3/4" OD × 4" thick mesh.
    • Whole material: SS 316L.
    • Number of sections: 3.
  • 316 stainless steel mist eliminator.
    • Width: 10 cm.
    • Length: 12 meters.
    • Aperture of loop: 7 mm.
    • Wire diameter: 0.3 mm.
  • Mist eliminator.
    • Material: stainless steel AISI 304.
    • Diameter: 765 mm.
    • Removal efficiency: 99%.
    • Fluid: natural gas.
  • Mist eliminator.
    • Material: stainless steel 304.
    • Diameter: 750 mm.
    • Thickness: 100 mm.
  • Mist eliminator.
    • Mist material: stainless steel AISI 304.
    • Mist diameter: 1414 × 225 × 100 mm.
    • Wire thickness: 0.23 mm or 0.28 mm.
    • Wire surface area: 350 m2/m3.
    • Density: 192 kg/m3.
  • Mist eliminator.
    • Wire thickness: 33 SWG.
    • Mist material: stainless steel 304.
    • Mist eliminator: 10 × 2'.
    • Bulk density: 144 kg/cu.m.
  • Mist eliminators.
    • Material: stainless steel 304.
    • Diameter: 300 mm.
    • Thickness: 100 mm.
  • Mist eliminator.
    • Material: stainless steel steel 304.
    • Diameter: 750 mm.
    • Thickness: 100 mm.
  • Mist eliminators
    • Material: stainless steel 304.
    • Diameter: 300 mm.
    • Thickness: 100 mm.
  • 316 SS mist eliminator.
    • Thickness: 6".
    • Diameter: 0.011".
    • Removal efficiency: 99.7% of 10 micron and greater.
    • Additional information: 12 lb per cubic feet mesh pad fit in to 20" outside diameter vessels.
  • Knitted mesh type mist eliminator.
    • Thickness: 100 mm.
    • O.D diameter: 684 mm.
    • Material of construction: stainless steel 316.
    • Free C.S area: >95%.
    • Mesh surface area: >350 m2/m3.
    • Wire thickness: 0.23 mm - 0.28 mm.
  • SS 304 mist eliminator.
    • DP. thickness: 200 mm.
    • OD: 3886 mm.
    • Sectional: 330 mm.
    • Width: 1295 mm.
    • Plate thickness: 3 mm.
    • Density: 190 kg/m3.
    • Pressure: 1.76 kg/cm2.
    • Temperature: 150 deg. C.
  • Mist eliminator.
    • Wire thickness: 0.23 mm and 0.28 mm.
    • Size: 1414 mm × 225 mm × 100 mm.
    • Mesh type: Koch 4120.
    • Material: AISI 304.
    • Density: 192 kg/m3.
    • Surface area: 377 m2.
    • Voids: 97.6 %.
    • Wire surface area: 350 m2/m3.
A corner of stainless steel mist eliminator with stainless steel girds.

Stainless steel mist eliminator top grid.

A round stainless steel mist eliminator with gird is divided into four parts.

Round stainless steel mist eliminator.